KEENOVA supplies quarry equipment, diamond wire, diamond tools and construction cutting equipment for stone quarrying, concrete cutting and related applications. Products are selected according to the material, cutting conditions, machine requirements and project objectives — which is why the range is organized by application, not by product type.
68 products in 14 product groups across four categories. Choose by application →
Quarry equipment, diamond wire, diamond tools and construction cutting equipment. Each category page shows the product groups, where they are used and what we need to select the right one.
Three application routes into the same product range. Each one leads to the equipment and tooling specified for that work, and to the cases where it has run.
Equipment and diamond tools for stone extraction, block cutting and quarry development.
Equipment and diamond tools for concrete, reinforced concrete, structural cutting and demolition.
Diamond cutting, grinding and polishing tools for stone processing applications.
Wire saw machines, quarry drilling equipment and the support equipment that keeps a quarry producing — sized to your stone, bench height and working conditions.
Continuous high-load block cutting from the 18.5kW compact machine up to the 75kW permanent-magnet drive, with the crawler machine as the mobile option for benches where a rail-mounted machine is impractical.
Blast-hole and development drilling: DTH rigs, rock drills, hammers and bits, drilling steels and button bits.
The second-machine layer that turns a wire saw into a working quarry system.
Diamond wire selected by application and working conditions — the material, its hardness and abrasiveness, the machine and the cutting duty — rather than by a generic specification list.
Bead specification and bond hardness chosen for the stone you are actually cutting. Genuine KEENOVA quarry wire includes the G129 granite wire and the M002B wire running in long-term dolomite and marble quarries.
For stone processing rather than quarry extraction. Mono diamond wire is the single-wire choice for block squaring, slab cutting and frame saw work; multi diamond wire runs as a set on multi-wire lines that split a block into slabs in one pass. Both are specified against the material, the machine, the bead count per meter and the cutting conditions of the line.
Wire built for reinforced concrete, structural cutting and demolition work.
Beads and wire components for assembly, re-sleeving and local wire making.
Diamond blades, segments, core bits, drilling tools and the full polishing train — selected against your material and machine so the tool suits the job instead of the other way round.
Blades and segments for block cutting, slab processing and stone finishing.
Core bits and rock drilling tools for stone and concrete. DTH bits, drilling steels and button bits are shared with Quarry Drilling Equipment — the same product page, listed from both groups.
The complete polishing line, from coarse grinding through to final shine.
Wire sawing, wall sawing and core drilling systems for reinforced concrete, structural work and plant decommissioning — cutting systems, not just machines.
For thick sections, deep cuts and areas a blade cannot reach.
Track-mounted sawing for openings, wall sections and structural modification.
Hole drilling in reinforced concrete for services, anchors and penetrations.
The tooling layer that finishes the job — cutting, grinding and surface preparation.
The questions we get asked before a first order.
Diamond wire selection depends on the material, hardness, abrasiveness, machine power, cutting dimensions, wire speed, working conditions and the required balance between cutting speed and wire life. KEENOVA evaluates these factors together before recommending a suitable wire specification.
Yes. Depending on the project, KEENOVA can coordinate wire saw machines, diamond wire, quarry drilling equipment, supporting equipment and related tools and consumables. Selection is based on the stone, quarry conditions, cutting requirements and production targets.
Diamond wire performance depends on the complete cutting system, not only the wire. We look at the stone characteristics, machine power, wire speed, tension, pulley arrangement, cooling and operating conditions to help identify the right wire specification and cutting parameters. The objective is stable cutting, predictable wire wear and a lower overall cutting cost.
We help customers identify suitable manufacturers, compare specifications and quotations, communicate with factories, negotiate terms, coordinate production, inspect goods before shipment, consolidate orders and arrange logistics — one coordination point when sourcing from multiple Chinese suppliers.
Lead time depends on the product, specification, quantity and production schedule. Standard diamond tools and selected products may be available within a few weeks, while customized equipment and larger orders may require longer production time. The estimated lead time will be confirmed with each quotation.
Useful information includes the material or stone type, hardness or abrasiveness if known, machine model and power, cutting dimensions, required output, working conditions, quantity and destination country. Photos, drawings or videos are also helpful where available.
Tell us the material, the machine and the working conditions. We will point you to the right product and confirm the specification before you order.
